ESTIMATES OF MEAN CHLOROPHYLL-a CONCENTRATION: PRECISION,ACCURACY, AND SAMPLING DESIGN1

ABSTRACT: Data from 56 north-temperate lakes and reservoirs are used to develop models predicting temporal variance as a function of the mean chlorophyll-a concentration. Trophy, as estimated by mean chlorophyll-a concentration, is shown to have little effect on the sampling effort required to achieve a pre-determined level of precision for lakes sampled year-round. Collecting ten observations results in a coefficient of variation that averaged 20 percent; collecting more than ten observations yields increasingly marginal improvements in precision. The same guidelines apply to mesotrophic or eutrophic lakes sampled in the summer, whereas oligotrophic lakes sampled in the summer require fewer observations to achieve the same level of precision. The bias resulting from collecting too few observations is minimized if five or more observations are collected.     

Hydraulic characteristics of an anaerobic ba ed reactor as onsite wastewater treatment system

The feasibility of using anaerobic ba ed reactor (ABR) as onsite wastewater treatment system was discussed. The ABR consisted of one sedimentation chamber and three up-flow chambers in series was experimented under di erent peak flow factors (PFF of 1 to 6), superficial gas velocities (between 0.6 and 3.1 cm/hr) and hydraulic retention times (HRT) (24, 36 and 48 hr). Residence time distribution (RTD) analyses were carried out to investigate the hydraulic characteristics of the ABR. It was found that the PFF resulted in hydraulic dead space. The dead space did not exceed 13% at PFF of 1, 2 and 4 while there was 2-fold increase (26%) at PFF of 6. Superficial gas velocities did not result in more (biological) dead space. The mixing pattern of ABR tended to be a completelymixed reactor when PFF increased. Superficial gas velocities did not a ect mixing pattern. The e ects of PFF on mixing pattern could be minimized by higher HRT (48 hr). The tank-in-series (TIS) model (N = 4) was suitable to describe the hydraulic behaviour of the studied system. The HRT of 48 hr was able to maintain the mixing pattern under di erent flow patterns, introducing satisfactory hydraulic e ciency. Chemical oxygen demand (COD) and total suspended solids (TSS) removals under all flow patterns were achieved more than 85% and 90%, respectively. The standard deviation of e uent COD and TSS concentration did not exceed 15 mg/L.     

Disruption of biofilms from sewage pipes under physical and chemical conditioning

Biofilms grown inside two sewage collecting pipes located in industrial and residential areas are studied. Bacterial biomass inside three layers of biofilms was evaluated. Biofilm cohesion under different mixing rate and ionic strength was also investigated. Effects of physical and chemical parameters in the biofilms were evaluated by monitoring turbidity, chemical and biochemical oxygen demands. Extracted organic matter from biofilms was partitioned to polar, aromatic and saturated fractions using activated silica column chromatography. Results revealed that bacterial biomass growth depending on biofilm thickness and stratification. The most loaded stratum in bacterial biomass was the sewage-biofilm interface stratum that represented 51% of the total bacterial biomass. Stirring rate and ionic strength of mono and bivalent salts showed a major influence in biofilm disruption. The stirring time enhanced the exchange dynamic and matter capture between biofilm fragments at the critical stirring rate 90 r/min. Sodium chloride showed the dispersing effect on biofilms in suspension, and decreased the BOD5 (biochemical oxygen demand) beyond the physiological salt concentration.     

Insights on the solubilization products after combined alkaline and ultrasonic pre-treatment of sewage sludge

This work provides insights on the solubilization products after a simultaneous combination of alkaline and ultrasonic (ALK + ULS) pre-treatment of sewage sludge. Soluble chemical oxygen demand (SCOD) increased from 1200 to 11,000 mg/L after such treatment. Organics with molecular weight around 5.6 kDa were solubilized because of the synergistic effect of ultrasound and alkali. Organics with molecular weight larger than 300 kDa increased from 7.8% to 60%, 16% and 42.3% after ULS, ALK and ALK + ULS treatment, respectively. Excitation emission matrix fluorescence spectroscopy analysis identified soluble microbial product-like and humic acid-like matters as the main solubilization products. Sludge anaerobic biodegradability was significantly enhanced with the simultaneous application of ALK + ULS pre-treatment. ALK + ULS pre-treatment resulted in 37.8% biodegradability increase compared to the untreated sludge. This value was higher compared to the biodegradability increase induced by individual ALK pre-treatment (5.7%) or individual ULS pre-treatment (20.7%) under the same conditions applied.     

Insights on the solubilization products after combined alkaline and ultrasonic pre-treatment of sewage sludge

This work provides insights on the solubilization products after a simultaneous combination of alkaline and ultrasonic (ALK + ULS) pre-treatment of sewage sludge. Soluble chemical oxygen demand (SCOD) increased from 1200 to 11,000 mg/L after such treatment. Organics with molecular weight around 5.6 kDa were solubilized because of the synergistic effect of ultrasound and alkali. Organics with molecular weight larger than 300 kDa increased from 7.8% to 60%, 16% and 42.3% after ULS, ALK and ALK + ULS treatment, respectively. Excitation emission matrix fluorescence spectroscopy analysis identified soluble microbial product-like and humic acid-like matters as the main solubilization products. Sludge anaerobic biodegradability was significantly enhanced with the simultaneous application of ALK + ULS pre-treatment. ALK + ULS pre-treatment resulted in 37.8% biodegradability increase compared to the untreated sludge. This value was higher compared to the biodegradability increase induced by individual ALK pre-treatment (5.7%) or individual ULS pre-treatment (20.7%) under the same conditions applied.     

Decomposition of diverse litter mixtures in streams

In view of growing interest in understanding how biodiversity affects ecosystem functioning, we investigated effects of riparian plant diversity on litter decomposition in forest streams. Leaf litter from 10 deciduous tree species was collected during natural leaf fall at two locations (Massif Central in France and Carpathians in Romania) and exposed in the field in litter bags. There were 35 species combinations, with species richness ranging 1-10. Nonadditive effects on the decomposition of mixed-species litter were minor, although a small synergistic effect was observed in the Massif Central stream where observed litter mass remaining was significantly lower overall than expected from data on single-species litter. In addition, variability in litter mass remaining decreased with litter diversity at both locations. Mean nitrogen concentration of single- and mixed-species litters (0.68-4.47% of litter ash-free dry mass) accounted for a large part of the variation in litter mass loss across species combinations. For a given species or mixture, litter mass loss was also consistently faster in the Massif Central than in the Carpathians, and the similarity in general stream characteristics, other than temperature, suggests that this effect was largely due to differences in thermal regimes. These results support the notion that decomposition of litter mixtures is primarily driven by litter quality and environmental factors, rather than by species richness per se. However, the observed consistent decrease in variability of decomposition rate with increasing plant species richness indicates that conservation of riparian tree diversity is important even when decomposition rates are not greatly influenced by litter mixing.     

New remains of the enigmatic cetartiodactyl Bugtitherium grandincisivum Pilgrim, 1908, from the upper Oligocene of the Bugti Hills (Balochistan, Pakistan)

Newly discovered fossil material of the enigmatic cetartiodactyl Bugtitherium grandincisivum from the upper Oligocene of the Bugti Member of the Chitarwata Formation in the Bugti Hills (Balochistan, Pakistan) is reported. These new specimens consist of two fragmentary muzzles (one preserving the first incisors and belonging to a juvenile) and a fragmentary right mandible with m3. The morphologies of the anterior dentition and m3 provided by these new specimens confirm the validity of the genus Bugtitherium and advocate probable anthracotheriid affinity for the genus rather than entelodontid or suoid affinities, but do not definitively close the debate about Bugtitherium’s familial affinities within Cetartiodactyla. Although still poorly documented, this large-sized anthracotheriid-like cetartiodactyl is a possible key form for understanding the early evolution of hippos, and, in turn, the ancestry of whales, because of both its morphological similarities with hippos and primitive Paleogene whales and its Tethysian distribution.     

Mapping social–ecological vulnerability to inform local decision making

An overarching challenge of natural resource management and biodiversity conservation is that relationships between people and nature are difficult to integrate into tools that can effectively guide decision making. Social–ecological vulnerability offers a valuable framework for identifying and understanding important social–ecological linkages, and the implications of dependencies and other feedback loops in the system. Unfortunately, its implementation at local scales has hitherto been limited due at least in part to the lack of operational tools for spatial representation of social–ecological vulnerability. We developed a method to map social–ecological vulnerability based on information on human–nature dependencies and ecosystem services at local scales. We applied our method to the small‐scale fishery of Moorea, French Polynesia, by combining spatially explicit indicators of exposure, sensitivity, and adaptive capacity of both the resource (i.e., vulnerability of reef fish assemblages to fishing) and resource users (i.e., vulnerability of fishing households to the loss of fishing opportunity). Our results revealed that both social and ecological vulnerabilities varied considerably through space and highlighted areas where sources of vulnerability were high for both social and ecological subsystems (i.e., social–ecological vulnerability hotspots) and thus of high priority for management intervention. Our approach can be used to inform decisions about where biodiversity conservation strategies are likely to be more effective and how social impacts from policy decisions can be minimized. It provides a new perspective on human–nature linkages that can help guide sustainability management at local scales; delivers insights distinct from those provided by emphasis on a single vulnerability component (e.g., exposure); and demonstrates the feasibility and value of operationalizing the social–ecological vulnerability framework for policy, planning, and participatory management decisions.